Search

This box of 10 inserts fit all Byrd Shelix heads. Size = 15mm  x 15 mm x 2.5 mm Radius 4"  Indexed on all 4 corners Solid Carbide  edges :  sharp points with edges with a 100mm radius  (place edge on table and you should see a little light on each end, they should rock slightly) Plastic Case Includes  ..

This box of 10 inserts fit all Byrd Shelix heads. Size = 15mm  x 15 mm x 2.5 mm Solid Carbide  edges :  sharp points with edges with a 100mm radius  (place edge on table and you should see a little light on each end, they should rock slightly) Plastic Case Includes  10 knives Genuine Byrd Inserts from Byrd. ..

This box of 10 inserts fits the Powermatic 1791212 shelix head. Why Pay $99.99 for the same box from Powermatic.  Size = 15mm  x 15 mm x 2.5 mm edges :  radius 100mm Plastic Case Includes  10 knives Oem  Made in Germany     ..

Type - Titan Lux Cut III Journal Spiral / Helical Cutterhead Fits - 8" Delta 37-315 Jointer Stocked and ready to ship! Reduce noise - A 25 decibel average sound reduction is common. Reduce grain tear-out and fuzzing Low cost operation - Four sided carbide knives can last up to 50 times longer than standard steel blades. Heads come..

Nachi Bearings, package contains 3 Bearings Left and Right Bearings for the Bearing kit for 20" Byrd Shelix Head for Grizzly G5850, G5850Z, G0544 20" Planer  fits the shelix # P203032..

For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 4" Diameter 3" cut length 16-60° corrugations  Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..

Single G25VR1 Insert for Byrd Flooring CuttersCarbide CNC ground insert from Byrd 3/4" materialSmallest Bevel 1/16" V opening in floor boardsMin Order 3 pc..

Single G25VR3 Insert for Byrd Flooring CuttersCarbide CNC ground insert from Byrd 3/4" materialLargest Bevel 3/4" V opening in  boards, typically used for panelingMin Order 3 pc..

Easily Change tips at your shop to start “like new”.  Either replace the tips with the identical pattern, or buy a set of tips with a different pattern. Be sure to check with us to see if the shapes are compatible.  Usually the same general pattern and same hand tip will go in the same head. Major Diameter 4" for 3/4" bore bodi..

Screwdriver type  : T-25+ Torx TIP: When replacing or rotating inserts, the seat should be as clean as possible. This will prevent breakage of inserts and ensure proper insert alignment. To properly align the insert, press the insert away from the seat while tightening to approximately 55 inch pounds torque. This allows th..

Screwdriver type (torque limiter calibrated and set).  : T-25+ Torx TIP: When replacing or rotating inserts, the seat should be as clean as possible. This will prevent breakage of inserts and ensure proper insert alignment. To properly align the insert, press the insert away from the seat while tightening to approximately 55 ..

These are a superior replacement insert for your BYRD cutter head, fits all byrd shelix style heads. Many agree this insert outperforms the BYRD insert. Many customers prefer the 4 indexed markings on these inserts as opposed to the single"BT" found on the byrd insert. 15mm x 15mm x 2.5mm - 4 Cutting Edges : 100mm radius  on all 4 sides with shar..

Be sure to check with us to see if the shapes are compatible.  Usually the same general pattern and same hand tip will go in the same head. Replacment Tips for Genuibe Byrd cutter heads 5RE (eased edge).  Carbide, order comes with 3 carbide tips  Made in USA..

Single T25VL1 Insert for Byrd Flooring CuttersFor 3/4 stock 1/16" wide bevel-Micro" great for prefinished flooring Carbide CNC ground insert from Byrd Min Order 3 pc..

Single T25VL3  Insert for Byrd Flooring CuttersFor 3/4 stock 1/4" wide bevel Carbide CNC ground insert from Byrd Min Order 3 pc..