Screwdriver type 

: T-25+ Torx

TIP:

When replacing or rotating inserts, the seat should be as clean

as possible. This will prevent breakage of inserts and ensure

proper insert alignment. To properly align the insert, press the

insert away from the seat while tightening to approximately 55

inch pounds torque. This allows the countersink in the tip and

the taper of the head on the flathead screw to slide the tip into

its proper position.

When replacing or rotating inserts, the seat should be as clean as possible. This will prevent breakage of inserts and ensure proper insert alignment. To properly align the insert, press the insert away from the seat while tightening to approximately 55 inch pounds torque. This allows the countersink in the tip and the taper of the head on the flathead screw to slide the tip into its proper position.