M2 HSS knives and Templates professionally ground on Weinig 960 Rondamat by master tool man. Experience required for the safe use of corruaged back knives. Sized for larger shapers and or small molders 22.5 degree bevel for stock up to 1-1/8" (long point of knife up CCW /please specify if long point should be down) Includes 2 Brand New Corrugat..

Suitable for producing ‘finger style’ reversible glue joints in softwood, hardwood and man-made boards on a spindle molder. 1-1/4" Borereplaces 61264 (discontinued) 120mm diameter 60mm cutting edge length  This cutter can Joint stock up to 60mm (about 2-3/8 inches)  . Aluminum  Body, Carbide insert New In The boxReplacement inse..

This stackable finger-jointing tool is an open-design cutter with no limitation on chip size. As such, it’s a high-production, high-performance tool to be used only with an automatic or power feed. The tool features a 3-wing solid-steel cutterhead that takes replaceable carbide knives. Each cutter will cut up to 40mm high and 10mm deep. Stack two o..

The Amana 61296  cutterhead features lightweight aluminum alloy construction with precision ground, micrograin carbide knives. It also features a unique and positive locking system to hold the knives, which ensures exact indexing, less down-time and more production. Features two-sided replaceable carbide knives. Manufactured to strict 'BG' spe..

The Amana 61297  cutterhead features lightweight aluminum alloy construction with precision ground, micrograin carbide knives. It also features a unique and positive locking system to hold the knives, which ensures exact indexing, less down-time and more production. Features two-sided replaceable carbide knives. Manufactured to strict 'BG' spe..

  Finger Joint Assembly Router Bits - Carbide Tipped - Southeast Tool SE3385; 7/32 Finger depth, 1 9/16 Cutting diameter, 1 1/4 Cutting length, 1/2 Shank.        ..

Outside diameter 4 1/2"4"OD available by special orderMinor Diameter 3 1/2"1 1/4" BoreVersatile and easy-to-use.  These 6 cutter sets are designed to perform the 3 functions shown. Freeborn's standard sets cut 1/4” wide x 3/8” deep tongue and groove. Counterclockwise rotation with wood fed face down. Produce 22.5 degree lock miters for easy alignm..

Produce lock miters for easy alignment of corners with plenty of glue surface. only. Mini-Pro is made to run only on 3/4” spindle. Material to 1-1/8”.  Part A and B are both run flat in horizontal position on shaper table. Part B is run again on table saw to  cut groove (see diagram) Counterclockwise rotation&nbs..

Package contains 1 freeborn  3 wing carbide tipped shaper cutter (Pictured). 1 1/4" Bore CCW-MFU CW  opposite rotation  (add $32) (Alloy tips are extra, please inquire)   Tip: Run drawer front face up in horizontal position over the top of the cutter. Drawer sides are run on end in a vertical position against the shaper fence.  Designed fo..

Outside diameter 4 1/2"4"OD available by special orderMinor Diameter 3 1/2"1 1/4" BoreVersatile and easy-to-use.  These 6 cutter sets are designed to perform the 3 functions shown. Freeborn's standard sets cut 1/4” wide x 3/8” deep tongue and groove. Counterclockwise rotation with wood fed face down. Produce lock miters for easy alignment of corne..

  Nearly New Demo use.  Mint   TECHNICAL SPECIFICATIONS CUT DEPTH (C) 13/64" MINOR HEIGHT (M) 13/32" OVERALL DIA. (D) 3-9/16" ANGLE (A) 32° BORE DIAMETER 1-1/4" CURRENT RPM 16000 SUGGESTED RPM 12000 CARBIDE HEIGHT (H) 1-23/32" NUMBER OF WINGS (Z) 3   Used Condition:  Never sharpe..

    TECHNICAL SPECIFICATIONS   CUT DEPTH (C) 5/16" MINOR HEIGHT (M) 3/8" OVERALL DIA. (D) 3-9/16" ANGLE (A) 20° BORE DIAMETER 1-1/4" CURRENT RPM 16000 SUGGESTED RPM 12000 CARBIDE HEIGHT (H) 1-3/32" NUMBER OF WINGS (Z) 3 Condition - New old stock ..

  Leitz, when you want the best! Produce angles from 0-85 degrees (largest range of any adjustable bevel cutter) Precision Ground Steel alloy Body , steel gibs durable and long lasting ideal for  shapers and small moulders     Industrial carbide bevel cutter with 2 edging knives.  Designed for production. Material: Soft and hard..

Brand New M2 HSS knives professionally ground on Weinig by master tool man.  Produces  a 1/2 by 11/16 tongue  Order contains 4 16/60 degree  corrugated back knives, templates and  printed layout sheet. Suitable for large shaper and small molder knife heads. Ideal for 20 degree hook, 100mm head (call for specific hook  and head diameter)..

Brand New M2 HSS knives professionally ground on Weinig by master tool man.  Produces  tongue and a groove  (per your desired thickness (up to 2")  &  length) Order contains 4 16/60 degree  corrugated back knives, printed layout sheet. Suitable for shaper and small molder knife heads. Ideal for 20 degree hook, 100mm head (call for specific hook ..