Byrd Shelix Journal Heads
Woodworkers know that a shear cut is far better than a straight cut. You also know that a stagger cut is much better than just a single straight knife and is a lot easier on your dust collection system. If you just 
happen to plane a nail or staple, it is not necessary to replace expensive knives the full length of your planer head. Replace 2 or 3 small inexpensive knives and you are ready to go. You might expect to pay a small fortune for a journal head with these features, but due to Oella Saw & Tool's unbelievable buying power we are proud to offer these genuine Byrd Products for less than you can buy direct from Byrd.
SPIRALLED - to break up chips for dust collection
SHEAR - to give clean cutting action
HELIX - to assist the chip flow
We stock many sizes and the list grows every week. If we do not have it, we will ship your planer and or jointer head from Byrd Direct to you for less than any supplier in the USA and Canada! Including buying direct from Byrd! We deliver at the lowest price guaranteed.
Byrd tooling is currently running 4-10 week lead times for some of their products. We are in daily production talks and will try to keep you informed on your order. If you need a delivery schedule, feel free to call before ordering. In the meantime, know that you are getting an exceptional tool at a great price, with a company that stands behind the product we sell.
Grizzly G-1018 Jointer BYRD shelix spiral head upgrade
There are 3 versions of this model. The older have a 3/4" shaft, the newer have a metric sized shaft. You will need to measure your Grizzly and confirm based on 3 drawings. ..
Screw for most common wood turning carbide inserts
Screw for standard inserts, fits all inserts except mini 11mm knife and 12mm square insert Length: 0.5" Width: 0.190" Threads: 10-32 *****uses a TP-25 tip, not a standard T-25 Tip. If you want a standard T-25 screw we suggest emailing, we will swap out . The standard t-25 screw has metric threads, same price..
Shelix 8" Byrd Shelix Head for Delta 37-315 8" Jointer with new bearings J081328/B
IN stock as of 3/10/24 Dont wait, these go quick Brand New Shelix Kit for Delta 37-315 2.875"CC 8"CL 13.25"OAL SHELIX Bearings(2) are included Customer Comments: I installed this cutter head on my Delta 37-315 jointer. The difference is amazing. Installation wasn't too bad. I used an arb..
SHELIX FOR POWERMATIC PJ1696 16" JOINTER - includes BEARINGS
SHELIX FOR POWERMATIC PJ1696 16" JOINTER - includes (2) NSK 6206Z AND (2) NSK 6204Z BEARINGS..
yrd Shelix 6" Journal Head for Powermatic P50 5/8" Shaft 6" Jointer with Bearings
SHELIX FOR POWERMATIC P50 WITH 5/8" SHAFT SHAFT SIZE ON THE PULLEY END OF THE SHAFT WILL NEED TO BE VERIFIED BEFORE ORDERING 2.875"CC 6"CL 9.062"OAL SHELIX Comes with (2) 6203ZZ BEARINGS..
TP25 Torx Plus Bit WITH 1/4" SOCKET for SHELIX
T25 Torx Plus bit for the SHELIX Bit on a 1/4'' socket drive...
Spare Screws for Byrd Shelix Journal Head mounts the Insert KN400
Byrd Spare Screws for Journal Heads made after 2002 mounts KN-400 style insert WARNING uses a TP-25 tip (P stands for PLUS...broader shoulder in the tip), not a standard T-25 Tip. If you have your byrd screwdriver tip and or torq wrench this will fit. ***** Length: 0.5" Width: 0.190" Threads: 10-32..
Byrd Shelix rabbeting insert tip carbide KNRBT for all shelix style heads
Now you can rebate using any shelix head by repalcing the farthest tip(S) on your shelix head with this custom ground carbide insert. Single Genuine KNRBT insert will fit all Byrd Shelix heads. FREE expedited 1st Class Mail USA SHIPPING ..