Byrd Corrugated Knife Heads
The corrugated back shaper heads are a very good alternative to the old style shaper collars in many applications. They are much less expensive and easier to use. They are excellent for short run jobs where you need to make your own knives.
Byrd cutter head for corrugated knives 2'' cut length 4'' Diameter, Bore 1.25'' 2 knives
For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 4" Diameter 2" cut length 16-60° corrugations Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..
Byrd cutter head for corrugated knives 3'' cut length 4'' Diameter, Bore 1.25'' 2 knives
For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 4" Diameter 3" cut length 16-60° corrugations Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..
Byrd cutter head for corrugated knives 4'' cut length 4'' Diameter, Bore 1.25'' 2 knives
For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 20 degree hook angle 4" Diameter 4" cut length 16-60° corrugations Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..
Byrd cutter head for corrugated knives 5'' cut length 4'' Diameter, Bore 1.25'' 2 knives
For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 20 degree hook angle 4" Diameter 5" cut length 16-60° corrugations Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..
Byrd cutter head for corrugated knives 6'' cut length 4'' Diameter, Bore 1.25'' 2 knives
For Large Shapers & Small Moulders 2 Knife Steel Cutter Heads for 1-1/4" spindles. 20 degree hook angle 4" Diameter 6" cut length 16-60° corrugations Uses 1/4", 5/16", 3/8" or 10mm corrugated back steel 1-1/2" Max. depth of cut* * Using 3/8" thick steel..