MG18 Grade ceratizit # 11852118 100mm TerminusTM Style Knives14.1mm Wide x 2.56mm Thick Carbide MG18 Grade Brand: Ceratizit # 11852107 Made in Germany Replaces Titan Quicklock DT 100C3..

MG18 Grade ceratizit # 11852118 130mm TerminusTM Style Knives 14.1mm Wide x 2.56mm Thick Carbide MG18 Grade Brand: Ceratizit # 11852112 Made in Germany Replaces Titan DT 130C3 Replaces Terminus Carbide # 9640130..

Longest side 28mm point to point x shortest side 16mm point to point  measured on a skew L =14mm x W= 14mm x 2mm - 4 Cutting Edges   Grade HC05 Tigra part# cross reference 013258 (fits many rebate spurs,) Holes 1 : 6.5mm Bevel: 30 degree Sold in packs of 10 only Plastic Case included Made in Luxembourg Composition:Co 4.0%, WC balanceGrain size:Fine..

MG18 Grade ceratizit # TMS2130 150 mm Terminus TM Style Knives14.1 mm Wide x 2.56 mm Thick Carbide MG18 Grade Replaces old part # 11852107 Made in Germany Replaces Titan DT 150C3..

NT-20-10HCVS 20” Singlehead Planer uses 2 spiral inserts.  The insert which comes on the 20" single head planer is a straight insert which measures 15mm x 15mm x 2.5mm.  It has vey small rounded corners, make sure you check the knife to determine if its straight.  The Northtech part # on the redbox  for the insert should be 15x15x2.5 SE  (straight ..

edges : straight (not a radius) with pointed sharp corners  This insert has a straight cutting edge on all 4 sides. Fits many spiral cutters. Always double check specs before ordering or installing. Width=15mm Length =15mm Grade MG18 (same as Tigra's T10MG) Exact Match to  Tigra 13315 Insert Thickness=2.5mm Holes 1 : 6.2mm bore countersunk   30 deg..

15mm x 15mm x 2.5mm - 4 Cutting Edges : 150mm radius on all  4 sides with rounded corners Engraved numbers on all corners (will not rub off as some laser etched inserts are prone when milling  certain materials) Grade CTOPP10 Matches Tigra 101540 in size and Carbide Grade (fits many spiral heads ) Please ask before ordering if unsure) Holes 1..

15mm x 15mm x 2.5mm - 4 Cutting Edges : 150mm radius on all  4 sides with rounded corners Engraved numbers on all corners (will not rub off as some laser etched inserts are prone when milling  certain materials) Price per insert, min order 10 Grade KCr08 Matches Tigra 101540 in size and Carbide Grade (fits many spiral heads ) Please ask before orde..

MG18 Grade ceratizit # 11852118 180mm TerminusTM Style Knives14.1mm Wide x 2.56mm Thick Carbide MG18 Grade Brand: Ceratizit # 11852118 Made in Germany Replaces Titan DT 180C3..

MG18 Grade ceratizit # 11852118 230mm Terminus  Style Knives14.1mm Wide x 2.56mm Thick Carbide MG18 Grade Brand: Ceratizit # 11852126 Made in Germany Replaces Titan DT 230C3 / TK230C3..

Width=12mm Length =24.7mm Thickness=1.5mm Grade :Kcr08 Holes 2 : 4mm diameter 14mm on center bevel: 35 degrees Plastic Case includes 10 knives Made in Germany   Composition:Co + Ni 4.2%, WC balance, Other 0.35%Grain size:Submicron grain 0.5 - < 0.8 µmTransverse rupture strength:2300 MPa334.000 P.S.I.Hardness:1920 HV101885 HV3093.4 HRAD..

Can this replace my standard 30mm insert with just 2 holes?  Yes, Ceratizit has lightened the insert to save weight and be more environmentally sound.  Its lighter on the bearings for your machine.  It will fit any head that uses the standard 30mm gibb with 2 pins.  The bevel is 35 degrees.  Width=12mm Length =30mm Thickness=1.5mm Grade :Kcr08 ..

Width=12mm Length =30mm Thickness=1.5mm Grade :Kcr08 Holes 2 : 4mm diameter 26mm on center bevel: 35 degrees Plastic Case includes 10 knives Made in Europe     Application: fits many 30mm rebate heads from Leitz, Saturn, Identical insert as the Amana ICK-30 for cutterheads ..

For Amana  Insert  Straight Bits RC-1080, RC-1082, RC-1154, RC-2080, RC-2082, RC-2154. great for plunge using the so called ramping technique the router insert is eased in and routs.  Available in two other grades of carbide for various applications. Call Dave for options HC05 All around grade of Carbide Made in Europe #80331173 30mm (29.5mm) ..

For Amana  Insert  Straight Bits RC-1080, RC-1082, RC-1154, RC-2080, RC-2082, RC-2154. great for plunge using the so called ramping technique the router insert is eased in and routs.  Available in two other grades of carbide for various applications. Call Dave for options HC05 All around grade of Carbide Made in Europe #80331173 30mm (29.5mm) ..