Screwdriver type  : T-25+ Torx TIP: When replacing or rotating inserts, the seat should be as clean as possible. This will prevent breakage of inserts and ensure proper insert alignment. To properly align the insert, press the insert away from the seat while tightening to approximately 55 inch pounds torque. This allows th..

Screwdriver type (torque limiter calibrated and set).  : T-25+ Torx TIP: When replacing or rotating inserts, the seat should be as clean as possible. This will prevent breakage of inserts and ensure proper insert alignment. To properly align the insert, press the insert away from the seat while tightening to approximately 55 ..

New in the Box, loaded with Carbide inserts , instructions and wrench. 2" cut length, 4" diameter, 1-1/4" bore.     ..

New in the Box, loaded with Carbide inserts , instructions and wrench. 2" cut length, 3" diameter, 1" bore.     ..

New in the Box, loaded with Carbide inserts , instructions and wrench. 3" cut length, 3" diamter, 1-1/4" bore.  Bearing not included We stock this  shelix head with bearings which are indexed to the head.  We have to get the head in from byrd if you order just the shelix head as we can't seperate the bearing and head p..

New in the Box, loaded with Carbide inserts , instructions and wrench. 4" cut length, 4" diamter, 1-1/4" bore.   ..

New in the Box, loaded with Carbide inserts , instructions and wrench. 4" cut length, 4" diamter, 1-1/4" bore.  Includes matched indexed rub bearing    FREE DOMESTIC SHIPPING  ..

Major Diameter 3" Cutting Edge Length 3" Uses 15 x 15 x 2.5 inserts Bearing included Price includes .035" shim (always run between bearing and head) Wrench included  Box included Bore 30mm Balanced and verified Made in USA  5 lbs Black Oxide Finish Useful in other woodworking applications.   ..

Major Diameter 3"  Cutting Edge Length 4" Uses 15 x 15 x 2.5 inserts Bearing included Price includes .035" shim (always run between bearing and head) Wrench included  Box included Bore 30mm Balanced and verified Made in USA  5 lbs Black Oxide Finish Useful in other woodworking applications.   ..

SHELIX FOR NORTHSTATE WJ-24..

Standard Break Over Handle (Calibrated & Set)  Does include Tip TIP: When replacing or rotating inserts, the seat should be as clean as possible. This will prevent breakage of inserts and ensure proper insert alignment. To properly align the insert, press the insert away from the seat while tightening to approximately 55 inch pounds torq..

Byrd, count on the best! Diameter (D) 3 for use with stock 3/4" bore stile and rail sets. Bore 3/4" ..

Byrd, count on the best! Diameter (D) 3-1/2  for use with stock 1-1/4" bore stile and rail sets. Bore 1-1/4" ..

Produce glass doors effortlessy, matched for tip shown Easily Change tips at your shop to start “like new”.  Either replace the tips with the identical pattern, or buy a set of tips with a different pattern. Be sure to check with us to see if the shapes are compatible.  Usually the same general pattern and same hand tip will go in the same h..

Easily Change tips at your shop to start “like new”.  Either replace the tips with the identical pattern, or buy a set of tips with a different pattern. Be sure to check with us to see if the shapes are compatible.  Usually the same general pattern and same hand tip will go in the same head. Major Diameter 4" for 3/4" and 4-1/2 for 1-1/4"..