Brand New Byrd Shelix upgrade for your Delta 37-220 Jointer.  Make sure you measure shaft and confirm date as the 37-220 specs change between years.  The Byrd head has to be ordered specifically to your model.   Bearings are oprional.  $30 extra charge applies.  Now is the time to change your bearings...

Brand New Byrd Shelix head with full set of bearings  for your Delta 37-220 Jointer.  Make sure you measure shaft and confirm date as the 37-220 specs change between years.  The Byrd head has to be ordered specifically to your model.   Bearings included.  Factory installed where applicable.  (when they can, they will press a new bearing on one or..

2.956"CC 6"CL 9.655"OAL SHELIX for DJ - 15 or Delta 37 - 150..

2.956"CC 6"CL 9.655"OAL SHELIX for DJ - 15 or Delta 37 - 150 Includes 2 new bearings, now is the time to install...

2.625"CC 5W 6.003"CL 9.405"OAL SHELIX FOR 6" Grizzly G1182 Jointers (typically older Grizzlys had the 2-5/8" Cutting Circle*. Includes 2 new Nachi Bearings (nice quality not chinese!) The newer G1182 are being made with a 63mm cutting circle. (2.480") *It is important to measure, get out your calipers and measure the steel  head, then add the ..

  NEWER MODEL JOINTERS HAVE CHANGED OVER TO A SMALLER CUTTING DIAMETER. THOSE ARE: THESE MODELS LISTED BELOW WILL HAVE TO MEASURED TO VERIFY WHICH CUTTING DIAMETER SHELIX THEY WILL NEED. NEWER MODEL JOINTERS HAVE CHANGED OVER TO A SMALLER CUTTING DIAMETER. THOSE ARE: Your model's cutting diameter will need to be measured to finalize or..

2.625"CC 6.003"CL 9.405"OAL SHELIX This head will fit older Models with a cutting circle with blades of 2.625" .  Around 2004, the OD was reduced to 63mm or 2.480"  NEWER MODEL JOINTERS HAVE CHANGED OVER TO A SMALLER CUTTING DIAMETER. THOSE ARE: THESE MODELS LISTED BELOW WILL HAVE TO MEASURED TO VERIFY WHICH CUTTING DIAMETER SHELIX THE..

2.625"CC 6.003"CL 9.405"OAL SHELIX Includes  BEARINGS This head will fit older Models with a cutting circle with blades of 2.625" .  Around 2004, the OD was reduced to 63mm or 2.480"  NEWER MODEL JOINTERS HAVE CHANGED OVER TO A SMALLER CUTTING DIAMETER.    THESE MODELS LISTED BELOW WILL HAVE TO MEASURED TO VERIF..

COMES WITH BEARINGS! NEWER MODEL JOINTERS HAVE CHANGED OVER TO A SMALLER CUTTING DIAMETER. THOSE ARE: THESE MODELS LISTED BELOW WILL HAVE TO MEASURED TO VERIFY WHICH CUTTING DIAMETER SHELIX THEY WILL NEED. NEWER MODEL JOINTERS HAVE CHANGED OVER TO A SMALLER CUTTING DIAMETER. THOSE ARE: Your model's cutting diameter will need to be measured ..

SHELIX FOR POWERMATIC P50 WITH 3/4" SHAFT 2.875"CC 6"CL 9.479"OAL SHELIX  SHAFT SIZE ON THE PULLEY END OF THE SHAFT WILL NEED TO BE VERIFIED BEFORE ORDERING..

Genuine BYRD SHELIX with Bearings for your Powermatic P-50 (3/4 SHAFT VERSION: MUST VERIFY BETWEEN 5/8 AND 3/4") 2.875"CC 6"CL 9.479"OAL SHELIX WITH BEARINGS Nice upgrade for your shop. Stop fussing with straight knife set ups.  ..

SHELIX FOR POWERMATIC P50 WITH 5/8" SHAFT SHAFT SIZE ON THE PULLEY END OF THE SHAFT WILL NEED TO BE VERIFIED BEFORE ORDERING 2.875"CC 6"CL 9.062"OAL SHELIX Options to consider adding at an extra cost (2) 6203ZZ BEARINGS..

NEWER MODEL JOINTERS HAVE CHANGED OVER TO A SMALLER CUTTING DIAMETER. Measure your outer diameter with blades and it should be 2.480" or 63 mm.  Around 2004 Powematic changed to a smaller head. The older heads measured around 2.625". 63mmCC 6.003"CL 9.405"OAL SHELIX   You may want to order bearings which is a different sku#. &nbs..

NEWER MODEL JOINTERS HAVE CHANGED OVER TO A SMALLER CUTTING DIAMETER. Measure your outer diameter with blades and it should be 2.480" or 63 mm.  Around 2004 Powematic changed to a smaller head. The older heads measured around 2.625". 63mmCC 6.003"CL 9.405"OAL SHELIX Comes with new Bearings, now is the time to change them...

BYRD HAS STOPPED MAKING THIS HEAD BECAUSE THE TABLES DO NOT ADJUST   Stop waisting time replacing hss knives, the set up, the sharpening, the resharpening...Upgrade to a shelix and manage the machine in house with a t star wrench by rotating the knives.  When the knives wear out, they cost from $2.90 each (bulk price) Cad drawings must be confir..